Safety instructions for the TireCheck sensors

In order to be able to guarantee a smooth commissioning, please observe the following safety instructions:

  1. Have the initial installation carried out by a specialist.
  2. Make sure that the installation is airtight and check the tightness after installation.
  3. If there is a loss of pressure, stop the vehicle immediately and check possible causes of the fault.
  4. Use the TireCheck only on your original tires with metal valves.
  5. Make sure that the sensors do not protrude beyond the rim contour. According to the StVo a protrusion of the sensors is not allowed. If the sensors protrude too far, shorter valves can be installed by a specialist company.
  6. Only use valve extensions if they have been approved by a specialist for use with the pressure sensors.