SuperSense Solid.
- For rough outdoor use and for fuel tanks.
- Works internally with the same, over 10,000 times proven SuperSense 2 chipset.
- Also available as a laser version (see table below).
Measurement of almost all liquids.
- Perfect for diesel fuels.
- High resistance to chemicals.
- Works reliably, even under the most adverse conditions.
Exact result through more measuring points.
As an example on a standard tank, you can see the accuracy in comparison:
Fits everywhere.
Whether for series integration or retrofitting, with a maximum edge length of just 80 mm and an installation height of less than 30 mm, the sensor fits anywhere. The fully digital measuring system of the latest generation is embedded within the housing and is effectively protected against external weather influences on an IP65 basis.
Uncompromising. Outdoorsy.
Built for harsh environments and at the same time highly precise in function. With available temperature ranges from -30°C to +85°C and an operating range up to 5,000 meters above sea level, this sensor is suitable for a very wide range of applications.
Wide voltage range
From 5 - 30V DC and very energy saving.
Protection against pollution
Perfect measurement in harsh environments.
Oil and fuel resistant
Suitable for measuring diesel fuels.
Fast, worldwide shipping
Production and warehousing in Germany.
Maximum tank height (A): 1000mm. Mounting height sensor electronics (B): 30mm
Simple installation. Many applications.
SuperSense was designed for use directly from the factory and for retrofitting.
retrofit. For manufacturers, the sensor can be adapted
to almost all tank shapes and tank types.
Comparison matrix
| SuperSense Solid | SuperSense Solid Laser | |
|---|---|---|
| Measuring range | Millimeter range | Millimeter range |
| Max. fill level | 200 cm | 200 cm |
| Mounting positions | Top, side and bottom of the tank | from the top of the tank |
| Power consumption | 5mA | 5mA |
| Measuring interval | 1 millisecond | 1 millisecond |
| Response time after start | 0.5 seconds | 0.5 seconds |
| Dust proof | ||
| Splashproof | IP65 | IP65 |
| Extended temperature range | ||
| Outdoor use | ||
| Optimized for diesel tanks | - | |
| Measurement of pressure-tight tanks |
All data under laboratory conditions. In practice, deviations in the measuring procedure may occur, e.g. due to manufacturing tolerances of the tank manufacturer, inclination of the vehicle or other factors. The lowest area of the tank can technically only be detected as soon as the water reaches or encompasses the lower area of the sensor hose. Please also note that the sensors are a precise measuring instrument that must not be overloaded, e.g. by putting the tank under additional pressure. If not explicitly stated, tanks must always be vented and pressure-free.
Installation partners and sources of supply Technical data and support Question about the sensor